Meat truck body
1. Material & performance
(1) New type FRP was used as outer and inner skin.
(2) The panel used for the van was constructed in type of sandwich.
The middle layer of the sandwich is a kind of new type extruded
polystyrene foam.which offers a very good thermal insulation
performance.
(3) The sandwich panel is fixed to the steel frame with high
strength adhesive and rivet.
2. Construction
(1) The van is built in a full close structure.
All panels are adhered with high strength structural adhesive to
achieve the most reliable conjunction, sealing and insulation
properties.
(2) This structure is also easy and fast to be assembled.
3. Specification
(1) The door panel is produced by a high accuracy process with
imported sealing rubber to keep good airtight and thermal
insulation.
(2) The inside and outside of the van are decorated with special
aluminum alloy profiles or stainless steel edge
stainless steel or FRP corner, and stainless steel or galvanized
hinge/lock/hanger.
(3) There are protection guardrails in both sides and end of the
van.
Various lights are installed as well. The whole body is beautiful,
harmony, strong, liable and durable.
(4) Reinforced floor design adopts high quality figured aluminum
floor panel to ensure the loading capacity, strong and wearing
resistant as well as easy to load or unload.
(5) The van can be designed according to customers requirement to
select material and design the structure as well as to install
refrigerators.
(6) Interior compartments can be made to meet the different
requirement of temperature in the same van.
4. Main properties;
(1) Light in weight: 30-40% lighter than domestic traditional
products.
(2) Thermal insulation properties: The coefficient of heat
conductivity of fiberglass reinforced plastics face panel is about
0.20W/M².K,
the coefficient of heat conductivity of hard polyurethane foam is
0.018-0.028W/M².K, and the K #118alue of overall coefficient of heat transference
can be below 0.3W/M².K.
(3) Surface properties: Surface of fiberglass reinforced plastics
panel possesses very high tensile strength, bending strength and
impact ductility.
It also possesses excellent chemical stability against rainwater,
acid and alkali with low PH #118alue. Therefore, its surface is
very smooth, unfading, anti-ultraviolet radiation and easy
clearance. Particularly, it is suitable to be used for various
carriage advertisements.
(4) Impermeability properties: Both sides of FRP panel possess
excellent water impermeability and water resistance.
(5) Fire retardant performance: It conforms to the national
standard B1 level.
(6) Service life: 4-6 times longer than domestic traditional
products.
(7) Easy maintainability: There is no trace on the panel after
repair, which is more competitive than steel and aluminum panels.
(8) Environmental protection properties: There is no volatile and
corrodible substance on surface of fiberglass reinforced plastics.
And the panels are sandwiched with extruded polystyrene foam
plastic without fluorine. It is green environmental protection
product.(9) Refrigerator groups made in USA or German or China can be
adopted according to customer's selection to meet different refrigeration property requirement.
